This project was a driveway and walkway combo, the design for the steps was regular concrete base mixed with a dark gray release powder. The stamp design was flagstone finsh with bordered edges.

This project was done in gunbarrel and the client wanted a washed finish on the patio. The way to acheieve that is with a chemical that delays the curing process and eats into the concrete (this chemical has differing strengths). We poured the colored concrete and added the chemical, from there we waited about 3 hours, we didn't touch the concrete until those 3 hours had passed. After those 3 hours we power washed the concrete and only the surface layer peeled of giving it th

This project took a lot of time to start beacuse of HOA approval, which was understandable because of the work entailed. This project was ground leveling, culvert installation along with PVC drainage on top of the concrete work we were already doing. The end result turned out really good.

This project was done in longmont in a well known strip mall. We were hired to replace a couple a walkway pieces and that was simple enough. The challenging part was timing the demolition and pours before the usual traffic hit the area. We prepped and demo'ed everything pretty early and the pours we're scehduled at around 5:30 AM-6:00 AM. Everything went smooth and both the client and ourselves were very satisfied with the end product.

This was a monolithic concrete slab poured in Longmont with integrated steps and a retaining wall at the lower end. The wall sits just under four feet tall and the steps flow directly into the driveway, making the whole structure feel intentional instead of pieced together. We were working with colder weather coming in, so extra precautions were taken to make sure the finish cured properly and held its strength. Even with the conditions, the final result came out solid. This

This project was a clean, functional addition to a client’s home—a new walkway designed to make everyday life easier and more...

This project was a year in the making. From the original estimate to the final pour, it was a job that required patience, planning, and...

This project was a straightforward driveway replacement on the surface, but it came with some unique challenges that required careful...

This project was a long time in the making. The original estimate was sent out back in the winter of early 2025, but we finally brought...